WiFi Packet Capturing and Analysis using Wireshark and Airodump-ng
Wireless networks are widely used today for internet connectivity in homes, offices, universities, and public environments. Unlike wired networks, WiFi communication occurs over radio frequencies and uses the IEEE 802.11 protocol family. Because the communication happens through the air, network packets can be captured and analyzed using specialized tools.
This blog explains WiFi communication fundamentals, important terminology, types of WiFi packets, device modes such as managed and monitor mode, and how tools like Wireshark, Airodump-ng, and Tcpdump can be used to capture and analyze wireless packets.
1. Basics of WiFi Communication
WiFi operates using the IEEE 802.11 standard. Devices communicate using radio signals through an access point (AP) or directly with other devices.
- Access Point (AP) – Device that provides wireless connectivity.
- Client Devices – Laptops, smartphones, IoT devices connecting to the AP.
- Wireless Channel – Radio frequency channel used for communication.
Communication happens through packets broadcast via radio signals and received by devices operating on the same channel.
2. Important WiFi Terminology
SSID (Service Set Identifier)
SSID is the name of the wireless network visible when scanning WiFi networks.
Example: Home_Network
BSSID (Basic Service Set Identifier)
BSSID is the unique MAC address of an access point.
ESSID
Multiple access points using the same SSID form an Extended Service Set.
MAC Address
Every wireless device has a unique hardware address.
WiFi Channels
- 2.4 GHz
- 5 GHz
- 6 GHz (WiFi 6E)
Encryption Types
- WEP – Old and insecure
- WPA – Improved security
- WPA2 – AES encryption
- WPA3 – Latest standard
3. WiFi Packet Types
WiFi communication uses IEEE 802.11 frames divided into three categories.
Management Frames
- Beacon
- Probe Request
- Probe Response
- Authentication
- Association Request
- Association Response
- Deauthentication
- Disassociation
Management frames help devices discover and connect to networks.
Control Frames
- RTS (Request To Send)
- CTS (Clear To Send)
- ACK (Acknowledgement)
Data Frames
Carry actual user data such as web traffic or file transfers.
4. WiFi Device Modes
Managed Mode
Default mode where the device connects normally to an access point.
Monitor Mode
Allows the wireless adapter to capture all packets in the air, including packets not intended for the device.
Master Mode
Used when the device acts as an access point.
5. Installing Required Tools
Install Wireshark
sudo apt update sudo apt install wireshark
Install Aircrack-ng Suite
sudo apt install aircrack-ng
Install Tcpdump
sudo apt install tcpdump
Verify Installation
wireshark --version airmon-ng tcpdump --version
6. Checking Monitor Mode Support
Check Wireless Interface
iwconfig
Check Monitor Mode Support
iw listExample output:
Supported interface modes: * IBSS * managed * monitor * AP
If monitor appears in the list, your WiFi adapter supports monitor mode.
7. Enabling Monitor Mode
Enable Monitor Mode
sudo airmon-ng start wlan0This creates a monitor interface:
wlan0mon
Verify Mode
iwconfig
Disable Monitor Mode
sudo airmon-ng stop wlan0mon
8. Packet Capture using Airodump-ng
Start Capture
sudo airodump-ng wlan0monDisplays:
- BSSID
- Channel
- Encryption
- Signal strength
- Connected clients
Capture Specific Network
sudo airodump-ng --bssid <BSSID> -c <channel> -w capture wlan0mon
9. Capturing Specific Packets (Probe Requests)
Probe requests are management frames sent by devices when searching for available WiFi networks.
Capture using Tcpdump
sudo tcpdump -i wlan0mon -e -I 'type mgt subtype probe-req'
Low Level BPF Filtering
sudo tcpdump -i wlan0mon -e 'link[0] & 0x0c = 0x00 and link[0] & 0xf0 = 0x40'
Save Captured Packets
sudo tcpdump -i wlan0mon -e 'link[0] & 0x0c = 0x00 and link[0] & 0xf0 = 0x40' -w probe_requests.pcap
10. Packet Analysis using Wireshark
Open Capture File
wireshark capture.cap
Wireshark Filters
Management Frameswlan.fc.type == 0Probe Requests
wlan.fc.type_subtype == 0x04
11. Ethical and Legal Considerations
Packet capturing should only be performed on networks where you have permission. Unauthorized monitoring of wireless traffic may violate privacy laws and organizational policies.
Conclusion
Understanding WiFi communication and packet structures is essential for network analysis, troubleshooting, and security research. Tools like Wireshark and Airodump-ng allow administrators and researchers to capture and analyze wireless packets to better understand network behavior.
Using monitor mode and packet capture tools makes it possible to observe management frames such as probe requests, beacon frames, and authentication processes, providing deeper insights into wireless network operations.